10.6

85Control Surfaces Support Guide
CM Labs Motormix right function buttons in Logic Pro
The table outlines the right function button controls and their assignments.
Note: If a modifier button, such as SHIFT, is shown below a button description, it indicates
that the control has an alternate use while the modifier is held down.
Control Modifier Assignment
PLAY/transport Play key command
SHIFT Switches the Select buttons to
Transport Section mode.
STOP/locate Stop key command
SHIFT Switches the Select buttons to
Locate mode.
FFWD/monitor Shuttle Forward key command
REWIND/status Shuttle Rewind key command
SHIFT Opens Project Settings
Synchronization window.
NEXT/configure Moves the playhead to the next
marker.
LAST/assign When rotary encoders are
displaying send destinations, use
of LAST/assign reverts to displaying
send levels. Otherwise, moves the
playhead to previous marker.
SHIFT When rotary encoders are
displaying send levels, use of LAST/
assign switches them to display
send destinations. When rotary
encoders are in Effect Edit mode,
use of LAST/assign switches them
to Effect Assign mode. When the
rotary encoders are in Instrument
Edit mode, use of LAST/assign
switches them to Instrument Assign
Mode.
ENTER/utility Identical to the Enter key on
computer keyboard
SHIFT Opens the Project Settings
Automation window.
ESCAPE When LED is lit, escapes from
“special” mode (denoted by flashing
LED). At all other times, identical
to the Esc key on the computer
keyboard.