10.6

84Control Surfaces Support Guide
Control Modifier Assignment
SUSPEND/create While held down, the groups are
temporarily disabled.
SHIFT Creates a new group, and enters
Group Edit mode.
PLUG-IN/compare Switches rotary encoders and Multi
buttons to Effect Assign mode. Use
the Rotary Select knob to choose
the Insert slot you want to edit. In
Effect or Instrument Assign mode, it
switches to Pan mode. In Effect Edit
mode, it switches to Effect Assign
mode. In Instrument Edit mode,
it switches to Instrument Assign
mode.
SHIFT Switches the rotary encoders and
Multi buttons to Instrument Assign
mode.
WINDOW/tools Switches the Select buttons to
Window Select mode.
SHIFT Switches the Select buttons to
Select Tool mode.
ALL/ALT/FINE While ALL/ALT/FINE is held down,
rotary encoders are in Full mode:
rotating counterclockwise sets
minimum; rotating clockwise sets
maximum value.
SHIFT While SHIFT and ALL/ALT/FINE are
held down, the rotary encoders are
in Fine mode. Parameter changes
are made in single unit (or smaller)
values.
DEFAULT/bypass Currently unassigned
SHIFT In Instrument Edit mode: switches
bypass state of the instrument. In
Effect Edit mode: switches bypass
state of the effect being edited.
UNDO/save Performs an Undo step. The LED is
lit if there is a Redo step available.
SHIFT Saves the project. The LED is lit
if the project contains unsaved
changes.
SHIFT Switches to Shift mode, where the
functions indicated by the (inverted)
labels below the buttons apply.