10.6

82Control Surfaces Support Guide
Mode Modifier Assignment
pre/post Switches between Pre and Post
Fader modes of the currently edited
send, and switches rotary encoders
to send level editing. Post mode is
indicated by a lit LED.
SHIFT (eff-3) Enables or disables the bypass of
the currently selected EQ band, and
switches rotary encoders to (EQ) Q
factor editing.
select Switches the rotary encoders
to Pan/Surround editing. The
parameter is chosen with the rotary
selector.
SHIFT (eff-4) Switches the rotary encoders to
channel parameter editing.
Note: In modal dialogs, the Multi buttons generate the computer keyboard character shown
on the button face.
CM Labs Motormix burn buttons in Logic Pro
These buttons (labeled I to P) have multiple uses depending on the current mode, as
indicated by the red LEDs to the left.
Note: If a modifier button, such as SHIFT, is shown below a button description, it indicates
that the control has an alternate use while the modifier is held down.
Mode Modifier Assignment
record Enables or disables Record Enable
state of channel.
SHIFT (fnctA) Switches automation mode to Latch.
ALL + SHIFT (fnctA) Switches automation mode of all
channels to Latch.
write Switches automation mode to Write.
ALL Switches automation mode of all
channels to Write.
SHIFT (fnctB) Switches automation mode to Read.
ALL + SHIFT (fnctA) Switches automation mode of all
channels to Read.
burn Switches automation mode to
Touch.
ALL Switches automation mode of all
channels to Touch.
SHIFT (fnctC) Switches automation mode to Off.
ALL + SHIFT (fnctA) Switches automation mode of all
channels to Off.
Note: In modal dialogs, the Burn buttons generate the computer keyboard character shown
on the button face.