10.6

79Control Surfaces Support Guide
Mode Assignment
PLAY/transport button flashes Transport section mode
• 1: Record
• 2: Pause
• 3: Stop
• 4: Play
• 5: Rewind
• 6: Fast Forward
• Upper LCD row displays current playhead position.
STOP/locate button flashes Locate mode
• 1: Goes to the left locator.
• 2: Goes to the right locator.
• 3: Enables or disables Cycle mode.
• 4: Enables or disables Autopunch mode.
• 5: Enters Marker mode (see below).
• 6: Opens Marker List.
• Upper LCD row displays the current playhead position.
Marker mode • 1 to 6: Select markers 1 to 6. Marker names are displayed in the upper
LCD row.
• 7: Creates a new marker.
• 8: Deletes the selected marker.
Group Edit mode Switches between group parameters. Parameter display can be shifted by
the View left and right buttons when the SHIFT button is held down.
Effect Assign mode Enters Effect Edit mode for the selected channel.
Effect Edit mode Enables or disables the selected parameter, or resets it to the default
value.
Instrument Assign mode Enters Instrument Edit mode for the selected (instrument) channel.
Instrument Edit mode Enables or disables the selected parameter, or resets it to the default
value.
Note: In modal dialogs, the Select buttons generate the computer keyboard character
shown on the button face.
CM Labs Motormix faders and pots in Logic Pro
The faders normally control volume. When in Flip mode, however, they duplicate the rotary
encoder assignments.
The table outlines the rotary pot controls and their assignments.
Note: If a modifier button, such as SHIFT, is shown below a button description, it indicates
that the control has an alternate use while the modifier is held down.
Control Modifier Assignment
Rotary pots 1 to 8 Control parameter chosen with the
Rotary Selector, as displayed in the
7 segment display (see below)