10.6

78Control Surfaces Support Guide
Motormix assignments
CM Labs Motormix Select buttons in Logic Pro
The Select buttons (the buttons just below the LCD) have multiple uses, depending on the
current mode.
Note: If a modifier button, such as SHIFT, is shown below a button description, it indicates
that the control has an alternate use while the modifier is held down.
Mode Assignment
Normal Selects the channel displayed in the upper LCD line. Channels can be
shifted to the left and right with the View left and right buttons.
Bank button LED flashing Channel View: Select buttons switch between displayed channel strips:
• 1: Switches to Single view.
• 2: Switches to Arrange view.
• 3: All view, MIDI channels
• 4: All view, input channels
• 5: All view, audio channels
• 6: All view, instrument channels
• 7: All view, aux and bus channels
• 8: All view, output and master channels
WINDOW/tool button LED on Window Select mode: Select buttons open, assign key focus, or close
a particular window type. LED off: If the window is not open, the button
opens it. LED on: If the window is open but does not have key focus, the
button activates it. LED flashes: If the window has key focus, the button
closes it.
• 1: Tracks window
• 2: Mixer
• 3: Event List
• 4: Score Editor
• 5: Step Editor
• 6: Piano Roll Editor
• 7: Control bar
• 8: Project Audio Browser
WINDOW/tool button flashes Select Tool mode: Select buttons choose a tool.
• 1: Pointer
• 2: Pencil
• 3: Eraser
• 4: Text tool
• 5: Scissors
• 6: Glue tool
• 7: Solo tool
• 8: Mute tool