10.6

75Control Surfaces Support Guide
Use the Euphonix Group knobset in Logic Pro
The Group knobset allows you to edit a channel strip’s group membership.
Add a channel strip to a group
With your EuCon device connected to Logic Pro:
1. Press the Group knob top, or key, to display the list of groups that the currently
selected channel strip is assigned to. This key is labeled Grp on the CM408T
channel strip.
Note: If using the MC Mix, press the CHAN key to enter Channel mode.
The group names are displayed on the Soft Keys, the touchscreen, or the display,
depending on the system you are using.
If a channel strip is associated with more than the first eight groups, you can use the
Page keys to display ensuing groups.
2. Press the knob top that features the name of the group you want to associate the
channel strip with.
• When you choose an inactive group number, the Group Settings window opens
automatically, with the channel strip being added to the group.
• When you choose an active group number, the channel strip is added directly to
the group.
Tip: The On key can also be used to switch between active and inactive group
membership for the selected channel strip.
3. Press the Back key to return to the top-level knobset.
Remove a channel strip from a group
With your EuCon device connected to Logic Pro:
1. Press the Group knob top, or key, to display the list of groups that the currently
selected channel strip is assigned to. This key is labeled Grp on the CM408T
channel strip.
Note: If using the MC Mix, press the CHAN key to enter Channel mode.
2. Press the knob top that features the name of the group you want to remove the channel
strip from.
That particular channel is removed from the group.
Tip: The On key can also be used to switch between active and inactive group
membership for the selected channel strip.
3. Press the Back key to return to the top-level knobset.