10.6

72Control Surfaces Support Guide
The currently active format value is indicated by a lit On key (on the MC Professional
and MC Mix devices). On the MC Control, it is indicated by a small green LED in the
lower left of the knob image.
3. Press the respective knob top to choose the input format you want.
Edit an instrument plug-in
With your EuCon device connected to Logic Pro:
1. Press the Input knob top, or key, to display the software instrument plug-in inserted in
the currently selected channel strip.
The instrument plug-in name is displayed on the Soft Keys, the touchscreen, or the
display, depending on the system you are using.
2. Press the knob top to display the instrument plug-in parameters in the order shown in
the Controls view of the instrument.
3. Rotate the respective knob to change the value.
Depending on the system you are using, for parameters with only two values, you can
either press the On key, or turn the respective knob, to switch between the two values.
The On key is lit when the value is 1 (or on) and unlit when the value is 0 (or off).
Pressing a knob top sets the controlled parameter to its default value.
If the instrument plug-in features more than eight parameters, use the Page keys to
navigate between pages of parameters.
4. Press the Back key to return to the top-level knobset.
Change or insert an instrument plug-in
With your EuCon device connected to Logic Pro:
1. Press the Input knob top, or key.
2. Press both Page keys simultaneously to switch to Input Configuration mode.
The Instruments plug-in menu appears. Press the Page keys to display ensuing plug-ins.
If an instrument plug-in is already inserted, the On key is lit (on the MC Professional and
MC Mix devices). On the MC Control, it is indicated by a small green LED in the lower
left of the knob image.
3. Choose the instrument you want:
• Pressing the knob top activates a submenu or inserts a selected instrument plug-in.
• Pressing the Back key navigates up one level in the menu hierarchy.
Use the Euphonix EQ knobset in Logic Pro
The EQ knobset allows you to edit the first Channel or Linear Phase EQ inserted in the
selected channel strip.
There are two pages, each showing four EQ bands on eight knobs:
• One page contains the parameters of EQ bands 1, 2, 7, and 8.
• One page contains the parameters of EQ bands 3, 4, 5, and 6.