10.6

71Control Surfaces Support Guide
If an Insert slot already contains an effect plug-in, the On key is lit (on the
MC Professional and MC Mix devices). On the MC Control, it is indicated by a small
green LED in the lower left of the knob image.
3. Select the Insert slot you want by pressing the respective knob top. Press the Page keys
to display Insert slots 9 to 15.
The Effect plug-in menu appears. Press the Page keys to display ensuing plug-ins and
to move through the effect plug-in hierarchy.
4. Choose the effect plug-in you want:
• Pressing the knob top enters a submenu or inserts a selected effect plug-in.
• Pressing the Back key navigates up one level in the menu hierarchy.
Use the Euphonix Input knobset in Logic Pro
The Input knobset behaves differently, depending on the channel strip type you are working
with—audio or software instrument.
On audio channel strips, this knobset allows you to:
• Set a channel strip’s input value (Input mode)
• Set a channel strip’s input format (Input Configuration mode)
On software instrument channel strips, this knobset allows you to:
• Edit an instrument plug-in (Input mode)
• Change or insert an instrument plug-in (Input Configuration mode)
Set a channel strip’s input value
With your EuCon device connected to Logic Pro:
1. Press the Input knob top, or key, to display all possible channel input values for the
selected channel strip.
Note: If using the MC Mix, press the CHAN key to enter Channel mode.
The input values are displayed on the Soft Keys, the touchscreen, or the display,
depending on the system you are using.
You can use the Page keys to display ensuing input values.
2. Press the knob top that features the name of the channel input value you want to set.
The currently active input value is indicated by a lit On key (on the MC Professional and
MC Mix devices). On the MC Control, it is indicated by a small green LED in the lower
left of the knob image.
Set an audio channel strip’s input format
With your EuCon device connected to Logic Pro:
1. Press the Input knob top or key.
Note: If using the MC Mix, press the CHAN key to enter Channel mode.
2. Press both Page keys simultaneously to switch to Input Configuration mode.
The selected channel strip’s input format values—Mono, Stereo, Left, Right, Surround—
are displayed.