10.6

69Control Surfaces Support Guide
Control of plug-ins with Euphonix devices in
Logic Pro
Logic Pro supports the Euphonix “Open plug-ins on workstation when editing” and “Close
plug-ins on workstation when exiting” preferences.
If the Link button is enabled in an open plug-in window:
• “Open plug-ins on workstation when editing” does not open a new window when a new
plug-in is selected but replaces the open window’s contents.
• “Close plug-ins on workstation when exiting” does nothing.
If the Link button is disabled in an open plug-in window:
• “Open plug-ins on workstation when editing” opens a new plug-in window.
• “Close plug-ins on workstation when exiting” closes the plug-in window.
Euphonix knobsets
Overview of Euphonix knob sets in Logic Pro
When using the Euphonix devices with Logic Pro, the Mixer’s channel strip functions can
be accessed and edited using knobsets. A knobset contains pages, each comprised of
eight parameters. Knobsets are organized hierarchically.
The top-level knobset leads to the following knobsets:
• Inserts: Press the Inserts knob top to display all effect plug-ins inserted in the currently
selected channel strip. (See Use the Euphonix Inserts knobset in Logic Pro.) If a plug-in
is enabled (and does not belong to the dynamic, EQ, or filter plug-in groups), either the
On key is lit (MC Pro and MC Mix) or the knob’s image shows a small green LED on the
lower left (MC Control). To switch the bypass state, press the respective On key or knob
image, or the Ins In key on the CM408T channel strip.
• Input: Press the Input knob top to display all possible channel input values for the
selected channel strip. (See Use the Euphonix Input knobset in Logic Pro.)
• Dyn: The Dyn knob top is not currently used to display a list, or allow editing, of
dynamic plug-ins. If a dynamic plug-in is enabled, either the On key is lit (MC Pro and
MC Mix) or the knob’s image shows a small green LED on the lower left (MC Control). To
switch the bypass state, press the respective On key or knob image or the Dyn In key on
the CM408T channel strip.
• EQ: Press the EQ knob top to switch to EQ editing mode. (See Use the Euphonix EQ
knobset in Logic Pro.) If an EQ plug-in is enabled, either the On key is lit (MC Pro and
MC Mix) or the knob’s image shows a small green LED on the lower left (MC Control). To
switch the bypass state, press the respective On key or knob image or the EQ In key on
the CM408T channel strip.
• Aux or Sends: Press the Aux or Sends knob top to switch to send editing mode. See Use
the Euphonix Aux or Sends knobset in Logic Pro. If an Aux or Send is enabled, either
the On key is lit (MC Pro and MC Mix) or the knob’s image shows a small green LED on
the lower left (MC Control). Pressing the respective On key or knob image switches the
bypass state.