10.6

66Control Surfaces Support Guide
Set up your MC Artist device for use with Logic Pro
1. Set up your device as described in the Euphonix user documentation.
2. Install the latest EuCon software on your computer. (If necessary, go to the Euphonix
website to download the most recent software version.)
3. With the EuControl application running on your computer, open Logic Pro.
Your MC Artist device automatically connects to the application.
Change the Euphonix track display in Logic Pro
By default, tracks shown in the Mixer and on the display of your Euphonix device mirror the
Mixer’s Arrange View. This means that all channel strips with corresponding Track window
tracks are displayed in the same order.
Note: Redundant tracks—where multiple tracks are routed to the same channel strip—are
not accessible.
Switching the Mixer view to another mode (using the view buttons or channel strip filter
buttons) does not update the Euphonix device display. You can, however, override the
default behavior.
Switch the view of channel strips on Euphonix devices
• Choose Logic Pro > Control Surfaces > Setup window, and change the Channel Strip
View in the Control Surface Group 1 menu.
Set up Euphonix MC Pro Soft Key assignments in
Logic Pro
The “Logic Pro.xml” Application Set file—installed with the EuCon software on your
MC Professional device—features a number of useful Soft Key assignments. It is possible
to edit these assignments.
Change a Soft Key assignment on your MC Professional device
With your EuCon device connected to Logic Pro:
1. Press the Setup button in the lower-right corner of the Soft Keys section on the device.
2. Select the respective Soft Key by pressing it.
3. Choose the EuCon command from the menu.
Logic Pro supports the following EuCon commands:
• Key Commands: All Logic Pro keyboard shortcuts (except the transport commands) are
found here. The touchscreen uses the same hierarchy as the Key Commands window.
Many of these keyboard shortcuts switch between states (on/off, for example) or set
a value. Most also provide feedback on the Soft Key; for example, a Soft Key assigned
to the Open/Close Score Editor command is illuminated when a Score Editor window is
open.