10.6

42Control Surfaces Support Guide
Mackie Control Jog/Scrub wheel in Logic Pro
The Jog/Scrub Wheel and SCRUB button can be used to navigate through the project,
which is useful for a number of transport tasks. Turn the dial to use it. The outlined Scrub
modes change the behavior of the Jog/Scrub Wheel.
• Scrub mode off: The Jog/Scrub Wheel moves the playhead.
• Scrub mode on: The Jog/Scrub Wheel performs scrubbing, which allows you to hear the
data of the selected (or soloed) tracks while scrolling or moving through the project.
Audio tracks are normally played back at their original speed. If you would rather hear
them at double speed, choose Logic Pro > Preferences > Audio > Drivers, and set
Maximum Scrub Speed to Double in the pop-up menu.
Note: You can also use the SCRUB button for Pause functionality.
• SHUTTLE mode: The Jog/Scrub Wheel shuttles the playhead—Rotating it increases
or decreases the speed at which the playhead moves. The SCRUB button LED flashes
when in Shuttle mode.
Mackie Control programmable user modes in
Logic Pro
The Mackie Control provides six programmable user modes, which you can use for your
own assignments. You can activate each of these modes by holding down the SHIFT button
and one of the Assignment buttons, as follows:
• TRACK + SHIFT = User mode 1.
• PAN/SURROUND + SHIFT = User mode 2.
• EQ + SHIFT = User mode 3.
• SEND + SHIFT = User mode 4.
• PLUG-IN + SHIFT = User mode 5.
• INSTRUMENT + SHIFT = User mode 6.
The Assignment display shows user modes as u1, u2, and so on.
Create an assignment in one of the user modes
To use in Logic Pro:
1. Activate the user mode you want to use by holding down the SHIFT button and pressing
one of the Assignment buttons, as listed above.
2. In Logic Pro, use the Learn process to create one or more assignments. See Logic Pro
User Guide.