10.6

40Control Surfaces Support Guide
Control Action
Rotate V-Pot 1 Shows and edits the current Autopunch state (off or on); you can also use
the DROP button.
Rotate V-Pot 3 Move—moves the current punch area by a bar with each click of the V-Pot.
Press V-Pot 5 Picks up the current playhead position for the punch in locator.
Rotate V-Pot 5 Changes the punch in locator in bars.
Rotate V-Pot 6 Changes the punch in locator in beats (denominator steps).
Press V-Pot 7 Picks up the current playhead position for the punch out locator.
Rotate V-Pot 7 Changes the punch out locator in bars.
Rotate V-Pot 8 Changes the punch out locator in beats (denominator steps).
Mackie Control Replace, Click, and Solo buttons in Logic Pro
These buttons are used for a number of global Logic Pro functions.
Replace, Click, and Solo buttons
• REPLACE button: Press to turn Replace mode on or off. There are independent click
settings for play and record. To access the click settings, choose File > Project Settings
> Metronome.
• CLICK button: Press to turn the MIDI or Klopfgeist metronome click on or off.
Press the SHIFT and CLICK buttons to activate or deactivate both External Sync mode
and transmission of MMC.
• SOLO button: Press to turn the Solo function on or off. This behaves like the Solo key
command.
Individual channels can be soloed with the SOLO buttons on each channel strip. MIDI
or audio regions can be selected, and soloed, along with the selected channels. Each
channel features an independent SOLO LED, which is lit when a channel strip is soloed.
The RUDE SOLO LED—just to the right of the Position/Time display—is lit when any
channel strip is soloed.
Press the SHIFT and SOLO buttons to activate Solo Lock mode.