10.6

39Control Surfaces Support Guide
Control Action
Press V-Pot 5 Picks up the current playhead position for the left locator.
Rotate V-Pot 5 Changes the left locator in bars.
Rotate V-Pot 6 Changes the left locator in beats (denominator steps).
Press V-Pot 7 Picks up the current playhead position for the right locator.
Rotate V-Pot 7 Changes the right locator in bars.
Rotate V-Pot 8 Changes the right locator in beats (denominator steps).
Use the Mackie Control Drop button in Logic Pro
The DROP button turns Autopunch mode on or off.
Navigate between punch in areas
To use with Logic Pro:
1. Press the MARKER button.
2. Press the DROP button, and when active (as indicated by the lit LED), press the FAST
FWD or REWIND button.
Set the punch in or punch out locator to the current playhead position
To use with Logic Pro:
• Hold down the DROP button and press FAST FWD or REWIND.
This also activates Autopunch mode.
Quickly define a new punch in area
To use with Logic Pro:
1. Navigate to the target punch in locator position with the Jog/Scrub Wheel.
2. Press the DROP and REWIND buttons.
3. Navigate to the target punch out locator position with the Jog/Scrub Wheel.
4. Press the DROP and FAST FWD buttons.
Use Punch view
To use with Logic Pro:
1. To activate Punch view, press the SHIFT and DROP buttons.
The mode display shows “Pu.”
2. To return to a regular assignment mode, press one of the Assignment buttons.
Note: Changing a punch locator value with the Mackie Control automatically activates
Autopunch mode in Logic Pro.