10.6

37Control Surfaces Support Guide
• Temporary Nudge mode: Hold down the NUDGE button and use one or more of the
V-Pots to use Nudge temporarily for one or two small moves. This action executes
the selected function, then exits Temporary Nudge mode as soon as you release the
NUDGE button. See Mackie Control Temporary Nudge mode in Logic Pro.
Mackie Control Large Nudge mode in Logic Pro
Hold down the SHIFT button, then press the NUDGE button to show eight functions on the
LCD that are mapped to the corresponding V-Pot buttons. These functions allow you to
move the selected region or events by various amounts or to a specific position. Press the
NUDGE button a second time to turn off Large Nudge mode.
The position of the first selected region or event is displayed above V-Pots 3 and 4. If
nothing is displayed, either a window that does not allow the selection of regions or events
is open or no regions or events are selected.
Control Label Action
V-Pot 1 Nudge Selects the nudge value used by the
REWIND and FAST FWD buttons.
These buttons move the selected
objects backward/forward by the
defined value.
V-Pot 2 Pickup Moves to the current playhead
position.
V-Pot 3 Bar Moves by one bar.
V-Pot 4 Beat Moves by the current project
denominator value (beats).
V-Pot 5 Division Moves by the current project
division value.
V-Pot 6 Ticks Moves by single ticks.
V-Pot 7 Frames Moves by one SMPTE frame.
V-Pot 8 Fram/2 Moves by half a SMPTE frame.
The cursor buttons emulate the computer keyboard’s arrow keys, allowing easy selection of
a region or event.
Note: Make sure that the ZOOM button is not active when using the cursor buttons.
Mackie Control Temporary Nudge mode in Logic Pro
Hold down the NUDGE button and use one or more of the V-Pots to use Nudge temporarily
for one or two small moves. This action executes the selected function, then exits
Temporary Nudge mode as soon as you release the NUDGE button.
In Temporary Nudge mode, the cursor buttons emulate the computer keyboard’s arrow
keys, allowing easy selection of a region or event.
The Nudge value for the REWIND and FAST FWD buttons can also be defined with the
function buttons.