10.6

22Control Surfaces Support Guide
Control Action
V-Pot 7 Edits the position (pre/post) of even-numbered sends.
V-Pot 8 Sets the mute state of even-numbered sends.
The Cursor Left and Cursor Right buttons shift between pages. The number of sends that
can be displayed simultaneously depends on the number of Mackie Control XTs you have.
Note: Make sure that the ZOOM button isn’t active when using the cursor buttons.
Mackie Control alternate Send edit mode options in Logic Pro
Hold down the SEND button to access the alternate Send edit mode options submenu in
the LCD. The mode display shows S_ or S_., depending on whether you are in Send Mixer
view or Send Channel view.
Control Action
V-Pot 1 or F1 Switches to Send Mixer view and selects destination.
V-Pot 2 or F2 Switches to Send Mixer view and selects send level.
V-Pot 3 or F3 Switches to Send Mixer view and selects position.
V-Pot 4 or F4 Switches to Send Mixer view and selects mute.
V-Pot 5 or F5 Switches to Send Channel view.
V-Pot 6 or F6 Switches to Send Channel Strip 2 view. This mode is similar to Send
Channel view, but parameters are arranged in a slightly different way. You
can control one parameter for all Send slots used in the selected channel
strip.
• The mode display shows “SE.” (Send channel strip).
• The upper LCD row shows the name of the channel strip, the text
“Sends,” the page number, and total number of pages.
• V-Pots 1 to 8 edit the displayed parameter.
• The horizontal cursor buttons shift between pages. The number of
parameters that can be displayed simultaneously depends on the
number of Mackie Control XTs you have.
V-Pot 7 or F7 Switches to Destination/Level Mixer view. In this mode, you can control
one Send slot for all channel strips. Each channel strip corresponds to the
channel strip name shown in the upper LCD row.
• The mode display shows d1 to d8, indicating the selected send.
• The upper LCD row shows channel strip names.
• The lower LCD row shows the destination of the selected send.
• Rotating a V-Pot preselects the send destination.
• Pressing a V-Pot confirms the preselected send destination.
• The SOLO buttons edit send position—a lit SOLO LED indicates Pre
Fader mode.
• The MUTE buttons set the send mute state.
• The faders edit the send level.