10.6

215Control Surfaces Support Guide
Control Modifier Assignment
*USER 4 Switches the Mixer to show all
channel strips that correspond to
tracks used in the Tracks window,
along with their signal flow.
8 Creates a new group and enters
Group Edit mode (see above).
*USER 4 Switches Mixer to All view,
displaying all channel strips that
exist in your project.
The DM2000 channel strips will also
reflect the All Channel Strip view.
9 Switches between the Tracks
window and the Mixer.
10 Shifts channel strips by one channel
strip to the left.
11 Shifts channel strips by one channel
strip to the right.
12 While held down, all groups are
disabled.
13 While held down, Value Change
mode is set to Fine: value changes
work at maximum resolution. Also
see descriptions of other buttons.
14 —
15 Performs an Undo of the last editing
operation.
*USER 4 Performs a Redo of the last Undo
operation.
*USER 5 Opens the Undo History window.
16 Saves the project.
*USER 5 Performs Save As operation,
allowing you to save the project with
a different name.