10.6

213Control Surfaces Support Guide
Yamaha DM2000 channel strips in Logic Pro
The table outlines the channel strip controls and their assignments.
Note: A modifier button (such as USER 4, preassigned to SHIFT/ADD) shown below a
control description indicates that the control has an alternate function while the modifier is
held down. Modifier buttons that need to be assigned manually by the user are shown with
an asterisk (*) that precedes the button name.
Control Modifier Assignment
Encoder Adjusts parameter selected in the
ENCODER MODE and AUX SELECT
sections.
Encoder Select button Pan selected: sets pan to center
position.
If MATRIX 1 on Send 1 to 8 is
selected: edits Send pre/post
position, Send mute on or off, or
sets Send level to default value.
Send Assign, Input, or Output
selected: confirms selection.
AUTO Cycles through automation modes.
With an automation mode button
held down, sets this automation
mode.
SEL If ENCODER MODE [ASSIGN 4] off:
selects channel strip.
If ENCODER MODE [ASSIGN 4] on:
• BYPASS off: selects channel strip
for plug-in selection.
• BYPASS on: switches bypass
state of currently selected Insert
slot.
*USER 4 Resets the volume level.
MATRIX SELECT 1 Resets the volume level.
SOLO Enables or disables the Solo button.
*USER 5 Disables Solo button of all channel
strips.
ON Enables or disables the Mute
button.
*USER 5 Unmutes all channel strips.
Channel strip display Displays channel strip name, or
send, input, or output assignment.
Fader Adjusts volume, or duplicates
encoder assignment in Flip mode.