10.6

209Control Surfaces Support Guide
Yamaha DM2000 Automix controls in Logic Pro
The table outlines the AUTOMIX controls and their assignments.
Note: A modifier button (such as USER 4, preassigned to SHIFT/ADD) shown below a
control description indicates that the control has an alternate function while the modifier is
held down. Modifier buttons that need to be assigned manually by the user are shown with
an asterisk (*) that precedes the button name.
Control Modifier Assignment
DISPLAY When DISPLAY is held down in
Channel Display mode, the display
shows the automation mode of the
channel strips in the current bank
selection.
REC Sets selected channel strip, or
channel strip group, to Write
automation mode. While held down,
and with the STEREO channel
strip AUTO button enabled, sets
automation mode to Write.
*USER 5 Sets all channel strips to Write
automation mode.
ABORT/UNDO Sets selected channel strip, or
channel strip group, to Touch
automation mode. While held down,
and with the STEREO channel
strip AUTO button enabled, sets
automation mode to Touch.
*USER 5 Sets all channel strips to Touch
automation mode.
AUTOREC Sets selected channel strip, or
channel strip group, to Latch
automation mode. While held down,
and with the STEREO channel
strip AUTO button enabled, sets
automation mode to Latch.
*USER 5 Sets all channel strips to Latch
automation mode.
RETURN Sets selected channel strip, or
channel strip group, to Read
automation mode. While held down,
and with the STEREO channel
strip AUTO button enabled, sets
automation mode to Read.
*USER 5 Sets all channel strips to Read
automation mode.
TOUCH SENSE Sets selected channel strip,
or channel strip group, to Off
automation mode. While held down,
and with the STEREO channel
strip AUTO button enabled, sets
automation mode to Off.