10.6

208Control Surfaces Support Guide
Control Modifier Assignment
Moving virtual encoders 1 to 4
(Use cursor keys, and then rotate
parameter wheel.)
Pan Assignment mode:
• Parameter control 1 edits pan or
surround angle.
• Parameter control 2 edits
surround diversity.
• Parameter control 3 edits
surround LFE level.
• Parameter control 4 edits spread.
Send Assignment mode:
• Controls the Send level of Sends
1 to 4 or 5 to 8.
Plug-in Assignment mode:
• Chooses Insert slot 1 to 4 or 5
to 8.
Plug-in Edit mode:
• Sets value.
Yamaha DM2000 LCD display in Logic Pro
The table outlines the LCD assignments.
Display Assignment
TIME CODE Active if counter is displaying SMPTE timecode.
BEATS Active if counter is displaying bars/beats/divisions/ticks.
Counter Displays SMPTE timecode or bars/beats/divisions/ticks.
SELECT ASSIGN Displays the encoder assignment as follows: Pan, Snd1 to Snd8, S1As to
S8As, In, Out.
Yamaha DM2000 Track Arming controls in Logic Pro
The table outlines the TRACK ARMING controls and their assignments.
Note: A modifier button (such as USER 4, preassigned to SHIFT/ADD) shown below a
control description indicates that the control has an alternate function while the modifier is
held down. Modifier buttons that need to be assigned manually by the user are shown with
an asterisk (*) that precedes the button name.
Control Modifier Assignment
1 to 24 Enables or disables the Record
Enable button of the specified
channel strip.
*USER 5 Disables the Record Enable buttons
of all channel strips.
MASTER Disables the Record Enable buttons
of all channel strips.