10.6

206Control Surfaces Support Guide
Yamaha DM2000 Encoder and Fader Mode controls in
Logic Pro
The table outlines the ENCODER MODE and FADER MODE controls and their assignments.
Control Assignment
PAN • Assigns pan/surround control to encoders.
• In Insert Display mode, assigns pan/surround parameters of the
selected channel strip to virtual encoders.
• In Channel Display mode, assigns pan/surround parameters of the 16
channel strips in current bank selection to virtual encoders.
AUX/MTRX • Assigns Send level control to encoders.
• In Insert Display mode, assigns Send level parameter of the selected
channel strip to virtual encoders.
• In Channel Display mode, assigns Send level parameters of the 16
channel strips in current bank selection to virtual encoders.
ASSIGN 1 Assigns channel strip input assignment to encoders. While held down, the
channel strip display shows the current channel strip input assignment.
ASSIGN 2 Assigns channel strip output assignment to encoders. While held
down, the channel strip display shows the current channel strip output
assignment.
ASSIGN 3 When encoders display a Send level, switches them to Send Destination
assignment mode. Press the encoder button (or ASSIGN 3 again) to
confirm the assignment.
ASSIGN 4 Determines mode of channel strip SEL buttons:
• Indicator off: SEL button used for channel strip selection
• Indicator on: SEL button used for insert selection or insert bypass,
depending on MATRIX SELECT [MATRIX 4]
FADER Enables or disables Flip mode.
AUX/MTRX Enables or disables Flip mode.
Yamaha DM2000 Display Access controls in Logic Pro
The table outlines the DISPLAY ACCESS controls and their assignments.
Note: A modifier button (such as USER 4, preassigned to SHIFT/ADD) shown below a
control description indicates that the control has an alternate function while the modifier is
held down. Modifier buttons that need to be assigned manually by the user are shown with
an asterisk (*) that precedes the button name.
Control Modifier Assignment
METER Clears overload LEDs.
*USER 4 Switches the Mixer to the All view,
displaying all channel strips that
exist in your project.
*USER 13 Opens or closes a second Tracks
window.