10.6

204Control Surfaces Support Guide
• Yamaha DM2000 LCD display in Logic Pro
• Yamaha DM2000 Track Arming controls in Logic Pro
• Yamaha DM2000 Automix controls in Logic Pro
• Yamaha DM2000 Locator controls in Logic Pro
• Yamaha DM2000 transport and cursor controls in Logic Pro
• Yamaha DM2000 channel strips in Logic Pro
• Yamaha DM2000 assignable keys in Logic Pro
Yamaha DM2000 Matrix Select controls in Logic Pro
The table outlines the MATRIX SELECT controls and their assignments.
Control Assignment
MATRIX 1 Switches SEL buttons and encoder buttons between normal behavior and
setting a parameter’s default value. When the AUX 6 button is held down:
• Pressing a channel strip’s SEL button resets the channel strip’s volume
level.
• Pressing a channel strip’s encoder button resets the channel strip’s
pan/surround value. (PAN also needs to be selected in the ENCODER
MODE section.)
MATRIX 2 Switches the encoder buttons between Send Position and Send Mute
mode.
MATRIX 4 If ENCODER MODE [ASSIGN 4] is on, switches the channel strip SEL
buttons between Insert Select (indicator off) and Insert Bypass (indicator
on) modes.
Yamaha DM2000 Aux Select controls in Logic Pro
The table outlines the AUX SELECT controls and their assignments.
Note: A modifier button (such as USER 4, preassigned to SHIFT/ADD) shown below a
control description indicates that the control has an alternate use while the modifier is held
down. Modifier buttons that need to be assigned manually by the user are shown with an
asterisk (*) that precedes the button name.