10.6

200Control Surfaces Support Guide
Control Modifier Assignment
DAW SUSPEND GRP Enables or disables the Group
Clutch.
*DAW SHIFT/ADD Switches the Mixer to show all
channel strips that correspond to
tracks used in the Tracks window,
along with their signal flow.
DAW CREATE GROUP Creates a new group and enters
Group Edit mode (see above).
*DAW SHIFT/ADD Switches the Mixer to the All view,
displaying all channel strips that
exist in your project.
The channel strips on your DM1000
device will also reflect the All
Channel Strip view.
DAW WIN MIX/EDIT Switches between the Tracks
window and the Mixer.
DAW CHANNEL - Shifts channel strips by one channel
strip to the left.
DAW CHANNEL+ Shifts channel strips by one channel
strip to the right.
DAW CTRL/CLUTCH While held down, all groups are
disabled.
DAW ALT/FINE While held down, Value Change
mode is set to Fine: value changes
work at maximum resolution. Also
see description of other buttons.
DAW MONI STATUS —
DAW UNDO Performs an Undo of the last editing
operation.
*DAW SHIFT/ADD Performs a Redo of the last Undo
operation.
*DAW OPTION/ALL Opens the Undo History window.
DAW SAVE Saves the project.
*DAW OPTION/ALL Performs a Save As operation,
allowing you to save the project with
a different name.
DAW WIN MEM-LOC Opens or closes the Marker pane in
the Lists area.
DAW EDIT TOOL Selects the next tool. While held
down, numerical buttons select a
specific tool.
DAW WIN INSERT Opens or closes the Sample Editor.
DAW REC/RDY ALL Disables the Record Enable buttons
of all channel strips.