10.6

199Control Surfaces Support Guide
Yamaha DM1000 assignable keys in Logic Pro
The assignable keys can be assigned to the functions outlined in the table.
Note: A modifier button, such as SHIFT/ADD, shown below a control description indicates
that the control has an alternate function while the modifier is held down. Modifier buttons
that need to be assigned manually by the user are shown with an asterisk (*) that precedes
the button name.
Control Modifier Assignment
DAW WIN STATUS Opens or closes the Project Audio
Browser.
DAW REC/RDY 1 to 16 Enables or disables the Record
Enable button of the specified
channel strip.
DAW WIN TRANSPORT Opens or closes the Control bar
window.
DAW BANK – Shifts channel strips by one bank to
the left.
DAW BANK + Shifts channel strips by one bank to
the right.
DAW SHIFT/ADD Enables a second function/use for
some buttons.
DAW OPTION/ALL While held down, Value Change
mode is set to Full. Turning the
encoder to the right sets the
maximum value. Turning it to the
left sets the minimum value. The
encoder also stops at its default
value. Also see description of other
buttons.
DAW GROUP STATUS Enters Group Edit mode:
• When a channel strip group
is selected, channel strip
membership is indicated by a lit
SEL button. Use this button to
enable/disable the channel strip’s
group membership.
• Virtual encoders 1 to 4 display
properties of the currently
selected group.
• Virtual encoder buttons 1 to 4
enable/disable properties of the
currently selected group.
• When INSERT/PARAM is set to
PARAM, the left and right Tab
Scroll buttons scroll through
the group properties. When set
to INSERT, the buttons scroll
through the groups for editing.
*DAW SHIFT/ADD Switches the Mixer to show all
channel strips that correspond to
tracks used in the Tracks window,
along with their signal flow.