10.6

196Control Surfaces Support Guide
Yamaha DM1000 Insert display mode in Logic Pro
Press the F2 button to select Insert display mode. In this mode, the LCD displays
parameters, allowing you to edit effects. This mode also allows you to switch between
different Insert slots, enabling each effect to be edited.
Control Assignment
COMPARE Switches the display between “track name/parameter name” and
“parameter name/parameter value” modes.
BYPASS Switches the bypass state of plug-in currently being edited.
INSERT/PARAM Switches between Plug-in Assign and Plug-in Edit modes.
Selecting virtual encoders 1 to 4
(Use cursor keys, and then press
ENTER button.)
Pan Assignment mode:
• Parameter control 1 button centers pan or surround angle.
• Parameter control 2 button centers surround diversity.
• Parameter control 3 button resets surround LFE level.
• Parameter control 4 button resets spread.
Send Assignment mode:
• Enables or disables Sends 1 to 4 or 5 to 8.
Plug-in Assignment mode:
• Confirms the plug-in selection for Insert slots 1 to 4 or 5 to 8, and
enters Plug-in Edit mode for the selected Insert slot.
Plug-In Edit mode:
• Sets value to default, or switches buttons with two states.
Moving virtual encoders 1 to 4
(Use cursor keys, and then rotate
parameter wheel.)
Pan Assignment mode:
• Parameter control 1 edits pan or surround angle.
• Parameter control 2 edits surround diversity.
• Parameter control 3 edits surround LFE level.
• Parameter control 4 edits spread.
Send Assignment mode:
• Controls the Send level of Sends 1 to 4 or 5 to 8.
Plug-in Assignment mode:
• Chooses Insert slot 1 to 4 or 5 to 8.
Plug-in Edit mode:
• Sets value.
Yamaha DM1000 Channel display mode in Logic Pro
Press the F3 button to select Channel display mode. In this mode, the parameter controls,
such as pan and send level, for channel strips 1 to 16 are displayed.
Control Assignment
Selecting virtual encoders 1 to 4
(Use cursor keys, and then press
ENTER button.)
When Send 1 to 8 is selected: edits Send pre/post fader position, enables
or disables Send mute, or sets Send level to default value.
Send, Input, or Output Assignment mode: confirms selection.
Moving virtual encoders 1 to 4
(Use cursor keys, and then rotate
parameter wheel.)
Adjusts parameter selected in the ENCODER MODE and AUX SELECT
sections.