10.6

195Control Surfaces Support Guide
Yamaha DM1000 LCD controls in Logic Pro
The table outlines the LCD controls and their assignments.
Note: A modifier button, such as SHIFT/ADD, shown below a control description indicates
that the control has an alternate function while the modifier is held down. Modifier buttons
that need to be assigned manually by the user are shown with an asterisk (*) that precedes
the button name.
Control Modifier Assignment
Left & Right Tab Scroll buttons Plug-in Edit mode: shifts the
parameter display to show the next/
previous page of parameter controls
(usually four) for the selected
plug-in.
*DAW ALT/FINE Plug-in Edit mode: shifts the
parameter display up/down by one
parameter for the selected plug-in.
DM1000 LCD display modes
Overview of DM1000 LCD display modes in Logic Pro
The LCD display contents reflect the page selected with the F2, F3, and F4 buttons.
All display modes show a number of Yamaha DM1000 LCD common elements in Logic Pro.
• Press the F2 button to select Yamaha DM1000 Insert display mode in Logic Pro.
• Press the F3 button to select Yamaha DM1000 Channel display mode in Logic Pro.
• Press the F4 button to select Yamaha DM1000 Meter display mode in Logic Pro.
Yamaha DM1000 LCD common elements in Logic Pro
The following elements are common across all pages in the LCD:
Display Assignment
TIME CODE Active if counter is displaying SMPTE timecode
BEATS Active if counter is displaying bars/beats/divisions/ticks
Counter Displays either SMPTE timecode or bars/beats/divisions/ticks.
SELECT ASSIGN Displays the encoder assignment as follows: Pan, Snd1 to Snd8, S1As to
S8As, In, Out.