10.6

194Control Surfaces Support Guide
Control Modifier Assignment
AUX 6 Switches SEL buttons and encoder
buttons between normal behavior
and setting a parameter’s default
value. When the AUX 6 button is
held down:
• Pressing a channel strip’s SEL
button resets the channel strip’s
volume level.
• Pressing a channel strip’s
encoder button resets the
channel strip’s pan/surround
value. (PAN also needs to be
selected in the ENCODER MODE
section.)
AUX 8 Determines mode of channel strip
SEL buttons when the STEREO
section AUTO button is off:
• AUX 8 indicator off: SEL button
used for channel strip selection
• AUX 8 indicator on: SEL button
used for Insert selection
Yamaha DM1000 Encoder and Fader Mode controls in
Logic Pro
The table outlines the ENCODER MODE and FADER MODE controls and their assignments.
Control Assignment
PAN • Assigns pan/surround control to encoders.
• In Insert Display mode, assigns pan/surround parameters of the
selected channel strip to virtual encoders.
• In Channel Display mode, assigns pan/surround parameters of the 16
channel strips in current bank selection to virtual encoders.
AUX • Assigns Send level control to encoders.
• In Insert Display mode, assigns Send level parameter of the selected
channel strip to virtual encoders.
• In Channel Display mode, assigns Send level parameters of the 16
channel strips in current bank selection to virtual encoders.
FADER/AUX Enables or disables Flip mode.