10.6

193Control Surfaces Support Guide
Yamaha DM1000 Aux Select controls in Logic Pro
The table outlines tıhe AUX SELECT controls and their assignments.
Note: A modifier button, such as SHIFT/ADD, shown below a control description indicates
that the control has an alternate function while the modifier is held down. Modifier buttons
that need to be assigned manually by the user are shown with an asterisk (*) that precedes
the button name.
Control Modifier Assignment
AUX 1 In Insert Display mode:
• Assigns Send 1 level of channel
strips to encoders.
• Assigns Send 1 level of the
selected channel strip to virtual
encoders.
• Assigns Sends 1 to 4 of the
selected channel strip to virtual
encoders. Use the ENTER button
to switch the bypass state of
Sends 1 to 4.
In Channel Display mode:
• Assigns Send 1 level of channel
strips to encoders and virtual
encoders.
• Shows current Send 1 destination
assignment, when button is held
down.
*DAW SHIFT/ADD Same as AUX 5, but for Send 6
AUX 2 Same as AUX 1, but for Send 2
*DAW SHIFT/ADD Same as AUX 5, but for Send 7
AUX 3 Same aıs AUX 1, but for Send 3
*DAW SHIFT/ADD Same as AUX 5, but for Send 8
AUX 4 Same as AUX 1, but for Send 4
AUX 5 In Insert Display mode:
• Assigns Send 5 level of channel
strips to encoders.
• Assigns Send 5 level of the
selected channel strip to virtual
encoders.
• Assigns Sends 5 to 8 of the
selected channel strip to virtual
encoders. Use the ENTER button
to switch the bypass state of
Sends 5 to 8.
In Channel Display mode:
• Assigns Send 5 level of channel
strips to encoders and virtual
encoders.
• Shows current Send 5 destination
assignment, when button is held
down.