10.6

192Control Surfaces Support Guide
• Yamaha DM1000 data entry controls in Logic Pro
• Yamaha DM1000 DM1000 channel strips in Logic Pro
• Yamaha DM1000 stereo channel strip control in Logic Pro
• Yamaha DM1000 assignable keys in Logic Pro
Yamaha DM1000 Display Access controls in Logic Pro
The table outlines the DISPLAY ACCESS controls and their assignments.
Note: A modifier button, such as SHIFT/ADD, shown below a control description indicates
that the control has an alternate use while the modifier is held down. Modifier buttons that
need to be assigned manually by the user are shown with an asterisk (*) that precedes the
button name.
Control Modifier Assignment
AUTOMIX When AUTOMIX is held down in
Channel Display mode, the display
shows the automation mode of the
16 channel strips in the current
bank selection.
PAIR/GROUP Enters Group Edit mode:
• When a channel strip group
is selected, channel strip
membership is indicated by a lit
SEL button. Use this button to
enable/disable the channel strip’s
group membership.
• Virtual encoders 1 to 4 display
properties of the currently
selected group.
• Virtual encoder buttons 1 to 4
enable/disable properties of the
currently selected group.
• When INSERT/PARAM is set to
PARAM, the left and right Tab
Scroll buttons scroll through
the group properties. When set
to INSERT, the buttons scroll
through the groups for editing.
*DAW SHIFT/ADD Switches the Mixer to show all
channel strips that correspond to
tracks used in the Tracks window,
along with their signal flow.
METER Clears overload LEDs.
*DAW SHIFT/ADD Switches the Mixer to the All view,
displaying all channel strips that
exist in your project.
*DAW ALT/FINE Opens or closes a second Tracks
window.
EFFECT Opens or closes the Sample Editor.