10.6

188Control Surfaces Support Guide
Yamaha 02R96 LCD display in Logic Pro
The LCD displays different data, depending on the page selected with the F2, F3, and F4
buttons:
• INSERT ASSIGN/EDIT Display view: Parameter details, plug-in selection, or plug-in
parameters. Press F2 to select this view.
• Channel view: Encoder values and channel strip display. Press F3 to select this view.
• Level meters view: Press F4 to select this view.
The following assignments are available in all three views:
Display Assignment
TIME CODE Active if counter is displaying SMPTE timecode.
BEATS Active if counter is displaying bars/beats/divisions/ticks.
Counter Displays SMPTE timecode or bars/beats/divisions/ticks.
SELECT ASSIGN Displays the Encoder assignment as follows: Pan, Snd1 to Snd8, S1As to
S8As, In, Out.
Yamaha 02R96 assignable keys in Logic Pro
The table outlines the USER-DEFINED KEY controls and their assignments.
Control Assignment
Display While held down, the display shows the automation mode of the channel
strips in the current bank selection.
1 Switches between the Tracks window and the Mixer.
2 Enables or disables the Group Clutch.
3 Sets selected channel strip, or channel strip group, to Write automation
mode.
4 Sets selected channel strip, or channel strip group, to Touch automation
mode.
5 Sets selected channel strip, or channel strip group, to Latch automation
mode.
6 Sets selected channel strip, or channel strip group, to Read automation mode.
8 Sets selected channel strip, or channel strip group, to Off automation mode.
9 Shifts channel strips by one bank to the left.
10 Shifts channel strips by one bank to the right.
11 Enables or disables volume automation playback and recording.
12 Enables or disables mute automation playback and recording.
13 Enables or disables pan automation playback and recording.
14 Enables or disables send level automation playback and recording.
16 Enables or disables plug-in parameter automation playback and recording.