10.6

185Control Surfaces Support Guide
Yamaha 02R96
Set up your Yamaha 02R96 in Logic Pro
Follow these steps to use your 02R96 with Logic Pro.
• Make sure that your 02R96 device is connected to the computer via USB.
• Make sure that the latest USB MIDI driver for the device is installed. Visit the
manufacturer’s website to download the most recent driver version, if necessary.
Set up your 02R96 with Logic Pro
1. On the 02R96 device, do the following:
• Press the DISPLAY ACCESS [DIO/SETUP] button repeatedly, until the Setup > MIDI/
Host page is visible.
• Use the cursor buttons to move to the first DAW parameter box in the SPECIAL
FUNCTIONS section, and rotate the parameter wheel to select USB and 1–2.
• Press the DISPLAY ACCESS [DIO/SETUP] button repeatedly, until the Setup >
Remote page is visible.
• Rotate the parameter wheel to choose General DAW as the TARGET parameter.
• Press the LAYER [REMOTE] button.
2. In Logic Pro:
When you open Logic Pro, the 02R96 device is installed automatically. You should see
three 02R96 (USB 1–3) icons in the Setup window, aligned horizontally.
02R96 assignments
Overview of Yamaha 02R96 assignments in Logic Pro
These sections outline the assignment of Yamaha 02R96 interface elements to Logic Pro
functions.
• Yamaha 02R96 Display Access control in Logic Pro
• Yamaha 02R96 Aux Select controls in Logic Pro
• Yamaha 02R96 Encoder and Fader Mode controls in Logic Pro
• Yamaha 02R96 Effect/Plug-in controls in Logic Pro
• Yamaha 02R96 LCD display in Logic Pro