10.6

182Control Surfaces Support Guide
Control Modifier Assignment
DAW GROUP STATUS Enters Group Edit mode:
• When a channel strip group
is selected, channel strip
membership is indicated by a lit
SEL button. Use this button to
enable/disable the channel strip’s
group membership.
• Virtual encoders 1 to 4 display
properties of the currently
selected group.
• Virtual encoder buttons 1 to 4
enable/disable properties of the
currently selected group.
• When INSERT/PARAM is set to
PARAM, the left and right Tab
Scroll buttons scroll through
the group properties. When set
to INSERT, the buttons scroll
through the groups for editing.
DAW SHIFT/ADD Switches the Mixer to show all
channel strips that correspond to
tracks used in the Tracks window,
along with their signal flow.
DAW SUSPEND GROUP Enables or disables the Group
Clutch.
DAW SHIFT/ADD Switches the Mixer to show all
channel strips that correspond to
tracks used in the Tracks window,
along with their signal flow.
DAW CREATE GROUP Creates a new group and enters
Group Edit mode (see above).
DAW SHIFT/ADD Switches the Mixer to the All view,
displaying all channel strips that
exist in your project.
The channel strips on your DM1000
device will also reflect the All
Channel Strip view.
DAW WIN MIX/EDIT Switches between the Tracks
window and the Mixer.
DAW CHANNEL – Shifts channel strips by one channel
strip to the left.
DAW CHANNEL + Shifts channel strips by one channel
strip to the right.
DAW CTRL/CLUTCH While held down, all groups are
disabled.
DAW ALT/FINE While held down, Value Change
mode is set to Fine: value changes
work at maximum resolution. Also
see description of other buttons.
DAW MONI STATUS —