10.6

180Control Surfaces Support Guide
Yamaha 01V96 data entry controls in Logic Pro
The table outlines the data entry controls and their assignments.
Note: A modifier button (such as SHIFT/ADD) below a control description indicates that the
control has an alternate use while the modifier is held down. Modifier buttons that need to
be assigned manually by the user are shown with an asterisk (*) that precedes the control
name.
Control Modifier Assignment
Parameter wheel Default: adjusts the value of the
currently selected parameter.
*DAW SHUTTLE Switches the parameter wheel to
Shuttle mode.
*DAW SCRUB Switches the parameter wheel to
Scrub mode.
[DEC] button Default: exits folder. In Go to Marker
dialog: cancels dialog.
*DAW ALT/FINE Opens or closes the Project Audio
Browser.
[INC] button Enters the selected folder.
Yamaha 01V96 channel strips in Logic Pro
The table outlines the channel strip controls and their assignments.
Note: A modifier button (such as SHIFT/ADD) below a control description indicates that the
control has an alternate use while the modifier is held down. Modifier buttons that need to
be assigned manually by the user are shown with an asterisk (*) that precedes the control
name.
Control Modifier Assignment
SEL Using *DAW AUTO OFF:
• FADER MODE [AUX 8] off: selects
channel.
• FADER MODE [AUX 8] on: selects
channel for insert assignment,
allowing you to insert effects.
Using the *DAW AUTO automation
modes (WRITE, TOUCH, LATCH,
READ):
• Cycles through automation
modes. Sets the selected mode
when an automation mode button
is held down.
*DAW SHIFT/ADD Resets the volume level.
SOLO Enables or disables the Solo button.
*DAW OPTION/ALL Disables the Solo button of all
channel strips.