10.6

179Control Surfaces Support Guide
Display Assignment
Moving virtual encoders 1 to 4
(Use cursor keys, and then rotate
parameter wheel.)
Pan Assignment mode:
• Parameter control 1 edits pan or surround angle.
• Parameter control 2 edits surround diversity.
• Parameter control 3 edits surround LFE level.
• Parameter control 4 edits spread.
Send Assignment mode:
• Controls the Send level of Sends 1 to 4 or 5 to 8.
Plug-in Assignment mode:
• Chooses Insert slot 1 to 4 or 5 to 8.
Plug-in Edit mode:
• Sets value.
Yamaha 01V96 Channel display mode in Logic Pro
Press the F3 button to select Channel display mode.
Control Assignment
Moving virtual encoders 1 to 4
(Use cursor keys, and then rotate
parameter wheel.)
Adjusts parameter selected in the ENCODER MODE and AUX SELECT
sections.
Selecting virtual encoders 1 to 4
(Use cursor keys, and then press
ENTER button.)
When Send 1 to 8 is selected: edits send pre/post fader position, enables
or disables send mute, or sets send level to default value. Send, Input, or
Output Assignment mode: confirms selection.
Yamaha 01V96 Meter display mode in Logic Pro
Press the F4 button to select Meter display mode.
Control Assignment
Level Meters Display momentary and peak level.
Yamaha 01V96 Selected Channel control in Logic Pro
The table outlines the SELECTED CHANNEL control and assignment:
Control Assignment
Pan control Adjusts the pan of the currently selected channel strip.