10.6

177Control Surfaces Support Guide
Control Modifier Assignment
AUX 6 Switches SEL buttons and encoder
buttons between normal behavior
and setting a parameter’s default
value.
When the AUX 6 button is held
down:
• Pressing a channel strip’s SEL
button resets the channel strip’s
volume level.
• Pressing a channel strip’s
encoder button resets the
channel strip’s pan/surround
value (PAN also needs to be
selected in ENCODER MODE
section).
AUX 7 Assigns Pan to encoders; assigns
selected channel strip’s pan/
surround parameters to virtual
encoders.
AUX 8 Determines mode of channel strip
SEL buttons:
• AUX 8 indicator off: SEL button
used for channel strip selection.
• AUX 8 indicator on: SEL button
used for Insert selection.
HOME Enables or disables Flip mode.
Yamaha 01V96 LCD controls in Logic Pro
The table outlines the LCD controls and their assignments.
Note: A modifier button (such as SHIFT/ADD) below a control description indicates that the
control has an alternate use while the modifier is held down. Modifier buttons that need to be
assigned manually by the user are shown with an asterisk (*) that precedes the control name.
Control Modifier Assignment
Left/Right buttons Plug-in Edit mode: Shifts the
parameter display to show the next/
previous page of parameter controls
(usually four) for the selected
plug-in.
*DAW ALT/FINE Plug-in Edit mode: Shifts the
parameter display up/down by one
parameter for the selected plug-in.
F1 Clears overload LEDs.
*DAW SHIFT/ADD Switches the Mixer to the All view,
displaying all channel strips that
exist in your project.
*DAW ALT/FINE Opens or closes a second Tracks
window.