10.6

176Control Surfaces Support Guide
Yamaha 01V96 Fader Mode controls in Logic Pro
The table outlines the FADER MODE controls and their assignments.
Note: A modifier button (such as SHIFT/ADD) below a control description indicates that
the control has an alternate use while the modifier is held down. Modifier buttons that need
to be assigned manually by the user are shown with an asterisk (*) that precedes
the control name.
Control Modifier Assignment
AUX 1 In Insert Display mode:
• Assigns Send 1 level of channel
strips to encoders.
• Assigns Send 1 level of the
selected channel strip to virtual
encoders.
• Assigns Sends 1 to 4 of the
selected channel strip to virtual
encoders. Use the ENTER button
to switch the bypass state of
Sends 1 to 4.
In Channel Display mode:
• Assigns Send 1 level of channel
strips to encoders and virtual
encoders.
• Shows current Send 1 destination
assignment, when button is held
down.
*DAW SHIFT/ADD Same as AUX 5, but for Send 6.
AUX 2 Same as AUX 1, but for Send 2.
*DAW SHIFT/ADD Same as AUX 5, but for Send 7.
AUX 3 Same as AUX 1, but for Send 3.
*DAW SHIFT/ADD Same as AUX 5, but for Send 8.
AUX 4 Same as AUX 1, but for Send 4.
AUX 5 In Insert Display mode:
• Assigns Send 5 level of channel
strips to encoders.
• Assigns Send 5 level of the
selected channel strip to virtual
encoders.
• Assigns Sends 5 to 8 of the
selected channel strip to virtual
encoders. Use the ENTER button
to switch the bypass state of
Sends 5 to 8.
In Channel Display mode:
• Assigns Send 5 level of channel
strips to encoders and virtual
encoders.
• Shows current Send 5 destination
assignment, when button is held
down.