10.6

175Control Surfaces Support Guide
Yamaha 01V96 Display Access controls in Logic Pro
The table outlines the DISPLAY ACCESS controls and their assignments.
Note: A modifier button (such as SHIFT/ADD) below a control description indicates that the
control has an alternate use while the modifier is held down. Modifier buttons that need
to be assigned manually by the user are shown with an asterisk (*) that precedes the
control name.
Control Modifier Assignment
*DAW AUTO STATUS While held down in Channel Display
mode, the display shows the
automation mode of the 16 channel
strips in the current bank selection.
PAIR/GROUP Enters Group Edit mode:
• When a channel strip group
is selected, channel strip
membership is indicated by a lit
SEL button. Use this button to
enable/disable the channel strip’s
group membership.
• Virtual encoders 1 to 4 display
properties of the currently
selected group.
• Virtual encoder buttons 1 to 4
enable/disable properties of the
currently selected group.
• When INSERT/PARAM is set to
PARAM, the left and right Tab
Scroll buttons scroll through
the group properties. When set
to INSERT, the buttons scroll
through the groups for editing.
*DAW SHIFT/ADD Switches the Mixer to show all
channel strips that correspond to
tracks used in the Tracks window,
along with their signal flow.
EFFECT Opens or closes the Sample Editor.