10.6

174Control Surfaces Support Guide
Yamaha 01V96
Set up your Yamaha 01V96 in Logic Pro
Follow these steps to use your 01V96 with Logic Pro.
• Make sure that your 01V96 device is connected to the computer via USB.
• Make sure that the latest USB MIDI driver for the device is installed. Visit the
manufacturer’s website to download the most recent driver version, if necessary.
Set up your 01V96 with Logic Pro
1. On the 01V96 front panel, do the following:
• Press the DISPLAY ACCESS [DIO/SETUP] button repeatedly, until the Setup > MIDI/
Host page is visible.
• Use the cursor buttons to move the first DAW parameter box in the SPECIAL
FUNCTIONS section, and rotate the parameter wheel to select USB and 1–2.
• Press the DISPLAY ACCESS [REMOTE] button repeatedly, until the Setup > Remote
page is visible.
• Rotate the parameter wheel to choose General DAW as the TARGET parameter.
• Press the LAYER [REMOTE] button.
2. In Logic Pro:
When you open Logic Pro, the 01V96 device is installed automatically. You should see
two 01V96 icons in the Setup window, aligned horizontally.
01V96 assignments
Overview of Yamaha 01V96 assignments in Logic Pro
These sections outline the assignment of Yamaha 01V96 interface elements to Logic Pro
functions.
• Yamaha 01V96 Display Access controls in Logic Pro
• Yamaha 01V96 Fader Mode controls in Logic Pro
• Yamaha 01V96 LCD controls in Logic Pro
• Yamaha 01V96 Selected Channel control in Logic Pro
• Yamaha 01V96 data entry controls in Logic Pro
• Yamaha 01V96 channel strips in Logic Pro
• Yamaha 01V96 assignable keys in Logic Pro