10.6

160Control Surfaces Support Guide
Roland SI-24 channel strips in Logic Pro
The table outlines the channel strip controls and their assignments.
Note: A modifier button (such as SHIFT) shown below a button description indicates that
the button has an alternate use while the modifier is held down.
Control Modifier Assignment
EQ ON/OFF 1 to 4 In Pan mode:
• Switches the bypass state of EQ
bands 1–4.
• Enters EQ/Send mode. If no
Channel or Linear Phase EQ is
present on the selected channel,
a Channel EQ is automatically
inserted.
In EQ/Send mode:
• Switches the bypass state of EQ
bands 1–4. The button LED is lit
when the EQ is enabled.
In Plug-in mode:
• Switches between Inserts 1–4.
A lit button LED indicates the
selected Insert slot.
• If a plug-in window is open, it
updates to reflect the plug-in
parameters of the selected Insert
slot.
SHIFT In EQ/Send mode: Enables or
disables Send 1–4 Mute.
EQ/SEND Switches Channel views between:
• EQ/Send Edit mode (LED on).
• Pan Edit mode (LED off).
PLUG-IN Switches Channel views between:
• Plug-in Edit mode (LED on).
(Plug-in window opens.)
• Pan Edit mode (LED off).
Plug-in window closes when Plug-in
Edit mode is exited.
SHIFT Switches Channel views between:
• Instrument Edit mode (LED on).
(Instrument window opens.)
• Pan Edit mode (LED off).
Instrument plug-in window closes
when Instrument Edit mode is
exited.