10.6

159Control Surfaces Support Guide
Roland SI-24
Set up your Roland SI-24 in Logic Pro
The SI-24 can be used as a control surface with all Mac systems that are capable of
running Logic Pro.
Important: You will require another device for audio input and output.
Use the SI-24 as a control surface
To use the Roland SI-24 with Logic Pro:
1. Connect the unit bidirectionally with two free (not used by other devices) MIDI interface
ports.
2. Choose Logic Pro > Control Surfaces > Setup.
3. Choose Install from the New menu.
4. Select Roland SI-24 in the Install window.
5. Click the Scan button.
Logic Pro scans for, and automatically installs, your control surface.
SI-24 assignments
Overview of Roland SI-24 assignments in Logic Pro
These sections outline the assignment of Roland SI-24 interface elements to Logic
functions.
• Roland SI-24 channel strips in Logic Pro
• Roland SI-24 status mode controls in Logic Pro
• Roland SI-24 channel assign controls in Logic Pro
• Roland SI-24 SI-24 surround/pan controls in Logic Pro
• Roland SI-24 numeric key controls in Logic Pro
• Roland SI-24 transport controls in Logic Pro