10.6

153Control Surfaces Support Guide
Control Modifier Assignment
Group Switches to Group editing mode:
• Encoder 1 to 10 push buttons edit
a group property. (The property
is shown in the LCD’s lower line.)
• Encoder 11 scrolls through group
properties.
• Encoder 12 selects a group to
edit. Its name is displayed in the
lower LCD line, above Encoder 12.
• Select buttons 1 to 8 activate/
deactivate group membership of
the channel.
1 to 8 Shifts the fader bank (a group of
channels or parameters) to the left
by one bank.
9 to 16 Shifts the fader bank to the right by
one bank.
17 to 24 Shifts the fader bank to the left by
one channel.
25 to 32 Shifts the fader bank to the right by
one channel.
Radikal Technologies SAC-2K software navigation controls
in Logic Pro
The table outlines the software navigation controls and their assignments:
Control Assignment
1 Num LED off: —
Num LED on: Equivalent to 1 on computer keyboard.
2 Num LED off: Equivalent to Left Arrow key on computer keyboard.
Num LED on: Equivalent to 2 on computer keyboard.
3 Num LED off: Equivalent to Up Arrow key on computer keyboard.
Num LED on: Equivalent to 3 on computer keyboard.
4 Num LED off: Equivalent to Right Arrow key on computer keyboard.
Num LED on: Equivalent to 4 on computer keyboard.
5 Num LED off: Performs Undo (of most recent editing operation).
Num LED on: Equivalent to 5 on computer keyboard.
6 Num LED off: —
Num LED on: Equivalent to 6 on computer keyboard.
7 Num LED off: Copies the selection (of regions or events).
Num LED on: Equivalent to 7 on computer keyboard.