10.6

152Control Surfaces Support Guide
Control Modifier Assignment
Snd/Ins 1 to 4 • If in Send mode, switches to
Mixer view (multichannel) send
level editing of Sends 1 to 4.
Encoders 9 to 12 edit Destination,
Level, Pre/Post, and Mute of
the selected channel. You must
confirm the send destination by
pushing the Encoder 9 button.
While held down, use Encoder 9
to select the Send number (1 to
8). The button’s LED is lit when
in Mixer view Send Level Editing
mode (of the selected channel
Send slot).
• If in Insert mode, switches to
Mixer view plug-in selection for
Inserts 1 to 4. Plug-in selection
is confirmed by pressing the
encoder’s push button. While
held down, use Encoder 9 to
choose the Insert slot number
(1 to 15). The button’s LED is lit
when in Plug-in Selection mode
(of the corresponding channel
Insert slot).
Audio Switches to Mixer view, and displays
audio channels.
SHIFT Switches to Mixer view.
MIDI Switches to Mixer view, and displays
MIDI channel strips.
SHIFT Switches to Tracks window view,
and displays the channel strips of all
tracks used in the Tracks window.
Input Switches to Mixer view, and displays
input channels.
SHIFT Switches to Mixer view, and displays
the master and output channels.
Inst Switches to Mixer view, and displays
(software) instrument channels.
SHIFT Switches to Mixer view, and displays
aux channels.
Bus Switches to Mixer view, and displays
bus channels.
SHIFT Switches to Single view.