10.6

150Control Surfaces Support Guide
Radikal Technologies SAC-2K LCDs and encoders in
Logic Pro
The table outlines the LCDs and encoder controls and their assignments:
Control Assignment
Left and middle LCDs Upper row displays the channel number when in a Mixer (multichannel)
view. The parameter name is shown when in a (single) Channel view.
Lower row shows the parameter value of the corresponding encoder (the
one directly below the display). Level meters are shown to the right.
Right LCD Upper row displays the name of the parameter being edited with the
corresponding encoder (the one below). Lower row displays the parameter
value (assigned to the encoder below the display). The Master Output
level meter is displayed at the far right.
Encoders Edit the corresponding parameter shown in the LCD.
Encoder push buttons Parameters with two values (On/Off): Switches between the two values.
Parameters that access items (plug-in selection, for example): Confirms
preselection. At other times, sets the parameter to its default value.
Radikal Technologies SAC-2K channel strips in Logic Pro
The table outlines the channel strip controls and their assignments.
Note: A modifier button, such as SHIFT, below a button description indicates that the
button has an alternate use while the modifier is held down.
Control Modifier Assignment
Mute/Solo Switches Mute/Solo 1 to 8 buttons
between Mute and Solo modes.
LED off: Mute/Solo buttons switch
Mute state on/off. LED on: Mute/
Solo buttons switch Solo state on/
off. LED flashes: Mute/Solo buttons
switch Record Enable state on/off.
SHIFT Sets Mute/Solo buttons to Record
Enable mode.
Mute/Solo 1 to 8 Mute/Solo LED off: Enables or
disables Mute; LED displays Mute
state. Mute/Solo LED on: Enables
or disables Solo; LED displays Solo
state. Mute/Solo LED flashing:
Enables or disables Record Enable;
LED displays Record Enable (armed/
disarmed) state.
SELECT 1 to 8 buttons Selects channel. Exception: In
Group mode, these buttons define
group membership of the channel.
Master Select button Switches Flip mode between Off
and Duplicate.