10.6

147Control Surfaces Support Guide
Set track pan position
You can use Launchpad devices to set pan position for each track to varying degrees,
depending on device. In Mixer mode, the pads in the Pan column are lit when the pan
position is not set to center. The farther the pan position is from the center, the brighter
the pads.
On the Launchpad Pro, Launchpad MK2, Launchpad X, and Launchpad Mini MK3 you can
set pan positions more precisely from left to right.
Do any of the following:
• Set the pan position to center: Press the Mixer button to enter Mixer mode, then press
the pad in the Pan column that represents the track you want to change.
• Set the pan position from left to right:
Launchpad MK2, Launchpad X, and Launchpad Mini MK3: In Mixer mode, press the Pan
Scene button to enter Pan mode.
Launchpad Pro: Press the Pan button to enter Pan mode.
In the row for the corresponding track, tap the pads or move your finger horizontally
across the pads to change the pan position. Tapping one of the two center-most pads
sets the pan position to center.
Press the Mixer button to exit Pan mode.
Launchpad Pro: Press the Pan button again to exit Pan mode.
Launchpad X and Launchpad Mini MK3: Press the Pan Scene button again to return
to Mixer mode, or press the Session button to return to Session mode.
Set track volume
You can use Launchpad devices to set the volume level for each track to varying degrees,
depending on device. In Mixer mode, the brightness of the pads in the Volume column
corresponds to the volume level; the brighter the pads, the louder the volume.
Do any of the following:
• Set the volume to 0 dB: Press the Mixer button to enter Mixer mode, then press the pad
in the Volume column that represents the track you want to change.
• Raise or lower the volume level:
Launchpad MK2, Launchpad X, and Launchpad Mini MK3: In Mixer mode, press the
Volume Scene button to enter Volume mode.
Launchpad Pro: Press the Volume button to enter Volume mode.
In the row for the corresponding track, move your finger horizontally across the pads
to change the volume level. Press the leftmost pad to turn the volume all the way down;
press the rightmost pad to turn the volume all the way up.
Press the Mixer button to exit Volume mode.
Launchpad Pro: Press the Volume button again to exit Volume mode.
Launchpad X and Launchpad Mini MK3: Press the Volume button again to return to
Mixer mode, or press the Session button to return to Session mode.