10.6

141Control Surfaces Support Guide
• Mixer: Switches to Mixer mode. On the Launchpad X and Mini MK3 models, use the
Session button to switch between Session and Mixer mode. The Launchpad Pro does
not have a single dedicated Mixer mode, but rather each mixer function is activated by
its own button. See Launchpad Pro mixer buttons.
• User mode buttons: Switches to one or more User modes. The User mode buttons are
labeled differently depending on the Launchpad model you are using.
• User 1, User 2: Launchpad, Launchpad MK2, Launchpad S, and Launchpad Mini
• User: Launchpad Pro and Launchpad Mini MK3
• Custom: Launchpad X
Scene buttons
In Session mode you use the Scene buttons along the bottom of the Launchpad to trigger
scenes in Live Loops. You also use the Scene buttons in Mixer mode to perform different
functions. The Scene buttons are labeled slightly different, depending on the Launchpad
model you are using. Unless noted otherwise, this document refers to the Scene buttons
labeled from left to right as follows:
• Record Arm
• Solo
• Mute
• Stop
• Send B
• Send A
• Pan
• Volume
Launchpad Pro function buttons
Use the following buttons on the Launchpad Pro for editing and arrangement in Session
mode.
• Shift: Modifier key, used to switch the function of other buttons.
• Click: Press to turn the metronome on and off.
• Undo:
• Press to undo the previous command.
• Press and hold Shift, then press the Undo button to redo the last Undo command.
• Delete:
• Press to delete selected objects.
• Press and hold, then tap a pad to delete the cell.
• Quantize:
• Press to quantize selected regions, cells, or events.
• Press and hold, then tap a pad to quantize the cell.