10.6

135Control Surfaces Support Guide
Mackie C4 Marker overlay in Logic Pro
The Marker overlay is active when the MARKER button light is on.
• V-Selects 1 to 30 are assigned to markers 1 to 30. The upper LCD line shows the marker
name; the lower line displays INSIDE when the playhead falls within marker boundaries.
• V-Select 31 creates a new marker.
• V-Select 32 deletes the current marker.
Mackie C4 Track overlay in Logic Pro
The Track overlay is active when the TRACK button light is on.
Select a track/channel for Split Upper
To use the Mackie C4 with Logic Pro:
• Press V-Select 1 to 32. When a track/channel is selected for Split Upper, the bottom
LCD displays the word UPPER.
• BANK Left/BANK Right shifts the fader bank by the number of channels in the control
surface group.
• SINGLE Left/SINGLE Right shifts the fader bank by one channel.
Select a track/channel for Split Lower
To use the Mackie C4 with Logic Pro:
• Press V-Select 1 to 32. If a track/channel is selected for Split Lower, the word LOWER is
shown in the bottom LCD.
• BANK Left/BANK Right shifts the fader bank by the number of channels in the control
surface group.
• SINGLE Left/SINGLE Right shifts the fader bank by one channel.
Mackie C4 Channel Strip overlay in Logic Pro
The Channel Strip overlay is active when the CHAN STRIP button light is on.
• V-Pot/V-Select row 1 (V-Pots 1 to 8) edits the frequency and gain of EQ bands 3 to 6
(the parametric bands), provided an EQ effect is inserted in the current channel strip.
• V-Pot/V-Select row 2 (V-Pots 9 to 16) switches to Effect Edit mode for Inserts 1 to 8,
provided an effect is inserted in the respective Insert slot. If no effect is inserted, turn
the respective V-Pot to select an effect, then press the V-Select, to insert it.
• V-Pot/V-Select row 3 (V-Pots 17 to 24) edits Send 1 to 8 Level, provided the current
channel has active sends.
• V-Pot/V-Select 25 switches to Instrument Edit mode, provided the selected channel is
routed to an instrument channel, and an instrument plug-in is inserted.
• V-Pot/V-Select 26 edits the channel output destination.
• V-Pot/V-Select 27 sets the automation mode.
• V-Pot/V-Select 28 edits group membership.
• V-Pot/V-Select 29 edits volume.