10.6

132Control Surfaces Support Guide
Use Instrument Edit view
To use the Mackie C4 with Logic Pro:
1. Hold down the CHAN STRIP button.
The channel strip overlay labels are shown on the C4 displays.
2. Press V-Select 22 (labeled Instru Mixer).
3. Insert or select an instrument, which automatically switches the C4 to Instrument Edit
view.
In Instrument Edit View:
• V-Pots 1 to 32 constitute a group of 32 parameters. Splitting is possible (see Mackie C4
function buttons in Logic Pro).
• BANK Left/BANK Right shifts the edited parameters by one page.
• In Split mode, the BANK button behaviors apply to Split Upper.
• When holding down SHIFT, the BANK button behaviors apply to Split Lower.
• SINGLE Left/SINGLE Right shifts the edited parameters by 1.
• In Split mode, the SINGLE button behaviors apply to Split Upper.
• When holding down SHIFT, the SINGLE button behaviors apply to Split Lower.
Use Cycle View
To use the Mackie C4 with Logic Pro:
• Hold down the CHAN STRIP button, and press V-Select 31.
In Cycle view:
• V-Pot/V-Select 1 (labeled Cycle) shows and edits the current Cycle mode state (off
or on).
• V-Select 2 (labeled BySet) matches the cycle area to selections made in the Tracks
window (selected audio or MIDI regions).
• V-Pot 3 (labeled Move) moves the current cycle area by a bar with each click of the
V-Pot, when turned.
• V-Pot 4 moves the current cycle area by a beat with each click of the V-Pot, when
turned.
• The display shows the left and right locators above V-Pots 5 and 7.
• Pressing V-Select 5 picks up (uses) the current playhead position for the left locator.
• Turning V-Pot 5 changes the left locator position by bars.
• Turning V-Pot 6 changes the left locator position by beats (denominator steps).
• Pressing V-Select 7 picks up (uses) the current playhead position for the right
locator.
• Turning V-Pot 7 changes the right locator position by bars.
• Turning V-Pot 8 changes the right locator position by beats (denominator steps).