10.6

130Control Surfaces Support Guide
Use Send Mixer view
To use the Mackie C4 with Logic Pro:
1. Hold down the CHAN STRIP button.
The channel strip overlay labels appear on the C4 displays.
2. Press V-Select 20 (labeled Sends Mixer).
In Send Mixer view:
• Row 1 edits the send destination of the selected Send slot (on the selected channel).
• Row 2 edits the send level.
• Row 3 edits the send position (pre/post fader).
• Row 4 mutes/unmutes the send.
• The SLOT UP/SLOT DOWN buttons select the Send slot.
• The TRACK L and TRACK R buttons shift the fader bank (to the left or right) by the
number of channel strips in the control surface group.
Use Send Channel view
To use the Mackie C4 with Logic Pro:
1. Hold down the CHAN STRIP button.
The channel strip overlay labels are shown on the C4 displays.
2. Press V-Select 28 (labeled Sends).
In Send Channel view:
• Row 1 edits the (first) eight send destinations of the selected channel strip.
• Row 2 edits the send level of sends 1 to 8.
• Row 3 edits send positions 1 to 8 (pre/post fader).
• Row 4 mutes/unmutes sends 1 to 8.
• TRACK L and TRACK R switch to the previous or next channel.
Use Effect Assign Mixer view
To use the Mackie C4 with Logic Pro:
1. Hold down the CHAN STRIP button.
The channel strip overlay labels are shown on the C4 displays.
2. Press V-Select 21 (labeled PlugIn Mixer).
In Effect Assign Mixer view, the C4 displays the first four Insert slots of the eight selected
channels.
• Turn a V-Pot to switch between effects. (This action lets you browse through the effects
listed in the Effect menu, shown in Logic Pro mixer channels.)
• Press the respective V-Select to insert the chosen effect. This activates Effect Edit view,
where you can directly edit effect parameters.
• The SLOT UP/SLOT DOWN buttons switch between Insert slots.