10.6

109Control Surfaces Support Guide
Mackie Baby HUI channel strips in Logic Pro
The table outlines the channel strip controls and their assignments.
Note: If SHIFT is shown below a button description, it indicates that the control has an
alternate use while the modifier is held down.
Control Modifier Assignment
Rotary encoder Adjusts the parameter selected in
the Encoder Assignment section.
Rotary encoder push button Selects a channel strip.
SHIFT Turns Record Enable button of
selected channel on/off.
Signal indicator Illuminates when a signal is present
in the channel. It also indicates
channel selection.
SOLO Enables or disables Solo.
MUTE Enables or disables Mute.
Fader Adjusts volume.
Mackie Baby HUI encoder assignment controls in Logic Pro
The table outlines the encoder assignment controls and their assignments.
Control Assignment
PAN Assigns pan to rotary encoders.
SEND 1 Assigns Send 1 level to rotary encoders.
SEND 2 Assigns Send 2 level to rotary encoders.
SEND 3 Assigns Send 3 level to rotary encoders.
SEND 4 Assigns Send 4 level to rotary encoders.