10.6

104Control Surfaces Support Guide
Korg microKONTROL and KONTROL49 Solo/Mute mode in Logic Pro
This mode is enabled by pressing SCENE and Pad 2.
Pad Assignment
1–8 Enables or disables Solo for the eight channels being controlled with the
eight channel strips.
9–16 Enables or disables Mute for the eight channels being controlled with the
eight channel strips.
Korg microKONTROL and KONTROL49 Rec/Select mode in Logic Pro
This mode is enabled by pressing SCENE and Pad 3.
Pad Assignment
1–8 Turns the Record Enable button of the eight channels being controlled
with the eight channel strips on or off.
9–16 Selects one of the eight channels being controlled with the eight channel
strips.
Use the Korg microKONTROL and KONTROL49 User 4-8 modes in
Logic Pro
These modes are enabled by pressing SCENE and Pad 4 to 8.
In these modes, the Pads are unassigned. Use the Learn function: Logic Pro > Control
Surfaces > Learn Assignment for [function name] to assign them to key commands, for
example.
Note: When in Learn mode, if a Pad is pressed and released immediately, the learned
assignment does not work as expected.
Assign a keyboard shortcut
1. In Logic Pro, enable the Learn New Assignment button in the Key Commands window.
2. Choose a keyboard shortcut, then press and hold down the Pad, until the Learn New
Assignment button switches to the “up” state.
This slightly different approach is due to messages sent by the Korg devices: when the
Pad is immediately released, a value range is learned. Holding the Pad until Learn mode
disengages results in a fixed value being learned.