Specifications

104 Chapter 10 Plug-in Enhancements
You can audition multiple files by pressing Play once, and then stepping through the
files.
Note: If you activate the “Hide used Audio Files” option, files used in the currently
loaded EXS Instrument are dimmed.
Previewing the audio file in the EXS instrument
The “Preview audio file in EXS instrument” option temporarily replaces the sample files
in the currently selected zone. The zone is not directly triggered by activating this
option, but it can be triggered via MIDI notes while the Load Sample dialog is open.
You can step through different audio files in this way. The selected sample can be heard
as part of the zone, inclusive of all synthesizer processing (filters, modulation, and so
on). Once you find a sample you’d like to use, click Open to load it. Click Cancel to
return to the previously loaded sample.
Loading multiple samples in the Instrument Editor
The Drop Multiple Samples dialog provides an additional Zone width field, allowing
you to specify the width of the newly generated zones.
If you load multiple samples via Zone > Load Multiple samples, the Load Multiple
Samples dialog also provides a Start Note field, allowing you to specify the width and
start note of newly generated zones.
Note: When loading multiple samples by dragging them from the Finder into the
Instrument Editor, the Start Note field is not available, as the start key, end key and root
key are all set to the note that the file was dropped on.
Rubber-banding zones
You can rubber-band zones in the keyboard and Zone sections of the EXS24mkII
Instrument Editor.